The NovaStar MCTRL660, a state-of-the-art LED display controller, offers a range of inputs including a single DVI, HDMI, and audio input, complemented by four Ethernet outputs. It is capable of handling input resolutions as high as 1920×1200@60Hz.
Featuring a cutting-edge design, the MCTRL660 streamlines the screen configuration process, eliminating the need for a computer and enabling setup completion in just 30 seconds. Additionally, it provides a manual brightness adjustment feature for rapid and effortless screen calibration.
Keep reading for more information about Novastar Mctrl660:
2. Nova MCTRL 660 Software and Resource Download
3. Appearance
5. NovaStar MCTRL660 VS NovaStar MCTRL660 Pro
6. NovaStar 660 Manual and Guides
Set Input Resolution
Configure the Screen
Load Cabinet Files
Adjust Brightness
Image Quality
Factory Reset
Display Control
Nova Star 660 Firmware Update
1. NovaStar MCTRL660 Price
When you purchase LED Video Wall products from LED Screen Cloud Platform, you can also acquire the control system for the LED Wall as part of the package, all at a competitive price.
Should you encounter any issues with product installation, device and controller connections, LED controller adjustments, or screen display, we are always ready to provide solutions.
Click the image below to purchase the Nova MCTRL660 and obtain pricing for the LED video wall.
2. Nova MCTRL 660 Software and Resource Download
3. Appearance
3.1 Front Panel
| No. On the Above Picture | Button Name | Details | |
| 1 | Power switch | ON/OFF | |
| 2 | Indicator | PWR (Red) | Always on: The power supply is normal. |
| Off: The power is not supplied, or the power supply is abnormal. | |||
| RUN (Green) | Slow flashing (flashing once in 2s): The video input is unavailable. | ||
| Normal flashing (flashing 4 times in 1s): The video input is available. | |||
| Rapid flashing (flashing 30 times in 1s): The screen is displaying a startup image. | |||
| Breathing: The Ethernet port redundancy has taken effect. | |||
| STA (Green) | Always on: The device is operating normally. | ||
| Off: The device is not operating, or operating abnormally. | |||
| 3 | LCD screen | Display the device status, menus, submenus, and messages. | |
| 4 | Knob | Rotate the knob to select a menu item or adjust the parameter value. Press the knob to confirm the setting or operation. | |
| 5 | BACK Button | Go back to the previous menu or exit the current operation. | |
3.2 Rear Panel
Connector Type | Connector Name | Description |
Input | DVI IN | 1x SL-DVI input connector:
Maximum width: 3840 (3840×600@60Hz) Maximum height: 3840 (548×3840@60Hz)
|
HDMI IN | 1x HDMI 1.3 input connector
Maximum width: 3840 (3840×600@60Hz) Maximum height: 3840 (548×3840@60Hz)
| |
AUDIO | Audio input connector | |
Output | 4x RJ45 Gigabit Ethernet ports |
|
1x HDMI 1.3 |
| |
1x SL-DVI | ||
Power | AC 100V-240V~50/60Hz | |
4. Specifications
| Electrical Specifications | Input voltage | AC 100V~240V-50/60Hz |
| Rated power consumption | 16 W | |
| Operating Environment | Temperature | -20ºC to +60ºC |
| Humidity | 10% RH to 90% RH, non-condensing | |
| Physical Specifications | Dimensions | 483.0 mm × 258.1 mm × 55.3 mm |
| Net weight | 3.6 kg | |
| Packing Information | Carrying case | 530 mm × 370 mm × 140 mm |
| Accessory box | 402 mm × 347 mm × 65 mm Accessories: 1x power cord, 1x USB cable, 1x DVI cable | |
| Packing box | 550 mm × 440 mm × 175 mm |
5. NovaStar MCTRL660 VS NovaStar MCTRL660 Pro
The main differences between the NovaStar MCTRL660 and the NovaStar MCTRL660 pro are:
Resolution and Refresh Rate: The MCTRL660 can handle resolutions up to 1920×1200@60Hz. In contrast, the MCTRL660 pro supports resolutions as high as 3840×2160@60Hz.
Input Interfaces: The MCTRL660 has one HDMI, one DVI, and one AUDIO input. The MCTRL660 Pro is equipped with two HDMI inputs, one DVI input, and a 3G-SDI IN port.
Output Interfaces: The MCTRL660 has one DVI output and one HDMI output, while the MCTRL660 pro has one DVI output, one HDMI output, and one 3G-SDI LOOP port.
Network Interfaces: The MCTRL660 is equipped with four RJ45 network ports. And six RJ45 network ports are on the MCTRL660 pro.
Dimensions and Weight: The MCTRL660 measures 483mm x 258.1mm x 55.3mm with a net weight of 3.6kg, while the MCTRL660 pro measures 482.6 mm × 356.0mm × 50.1mm with a net weight of 4.6kg.
Price: The MCTRL660 pro is generally priced higher than the MCTRL660.
6. NovaStar 660 Manual and Guides
6.1 Set Input Resolution
This function allows you to set the output resolution for the graphics card. Typically, the content displayed on the screen should not surpass the graphics card’s output resolution.
To set the video source resolution, enter the Advanced Setting menu. This can be done in two ways: by selecting a preset resolution or by customizing a resolution.
Select a preset resolution
Choose an appropriate resolution and refresh rate from the controller’s standard resolution presets. If a suitable preset is not available, proceed to the second method to create a custom resolution.
HDMI/DVI Standard Resolution Presets:
- 1024×768@(24/30/48/50/60/72/75/85/100/120)Hz
- 1280×1024@(24/30/48/50/60/72/75/85)Hz
- 1366×768@(24/30/48/50/60/72/75/85/100)Hz
- 1440×900@(24/30/48/50/60/72/75/85)Hz
- 1600×1200@(24/30/48/50/60)Hz
- 1920×1080@(24/30/48/50/60)Hz
- 1920×1200@(24/30/48/50/60)Hz
- 2560×960@(24/30/48/50)Hz
Customize a resolution
Step 1: From the home screen, press the knob to access the main menu.
Step 2: Go to Advanced Setting > EDID Resolution and customize the horizontal resolution, vertical resolution, and refresh rate.
Step 3: Choose Apply and press the knob to activate the custom resolution. The customized resolution will only take effect after this step.
6.2 Configure the Screen
Step 1: Power on the screen.
- If the cabinet is in normal display, go to Step 2.
- If the cabinet is in abnormal display, first load the cabinet file and save it to the receiving card as described in the Load Cabinet Files section.
Step 2: Access the Screen Setting submenu to configure the parameters.
- Set Cabinet Row QTY and Cabinet Col QTY based on the actual screen setup.
- Set Out1 Cabinet QTY (number of cabinets loaded by Ethernet port 1). The device has restrictions on the number of cabinets loaded by the Ethernet ports. For details, see Note a).
- Set the Data Flow of the screen. For details, see Note c), d), and e).
Note:
a). If n ports are used to load the screen, the number of cabinets loaded by each of the first (n–1) ports must be the same, and the integral multiple of the number of cabinet rows or columns, and it must be greater than or equal to the number of cabinets loaded by the last port.
Example: If all these 4 Ethernet ports are used to load the screen, the number of cabinets loaded by ports 1–3 must be the same and the integral multiple of the number of cabinet rows or columns. Therefore, you need to set only the number of cabinets loaded by port 1 according to the actual situation. The number of cabinets loaded by port 4 must be less than or equal to the number of cabinets loaded by port 1.
b) Use NovaLCT software for configuring irregular screens.
c) For data flow settings, rotate the knob to select the desired data flow pattern.
d) Ensure that cabinets connected to each Ethernet port follow the same direction.
e) Ethernet port 1 should be at the start of the physical connection sequence.
6.3 Load Cabinet Files
Save the cabinet configuration file (.rcfgx or .rcfg) to your local PC first. (Note: Irregular cabinet configuration files are not supported.)
Note: Irregular cabinet configuration files are not supported.
Step 1: Open NovaLCT and go to Tools > Controller Cabinet Configuration File Import.
Step 2: On the page that appears, choose the active serial port, and click Add Configuration File to select and add a cabinet configuration file.
Step 3: Click Save the Change to HW to apply the changes to the controller.
6.4 Adjust Brightness
To tailor the LED display’s brightness to ambient lighting conditions and enhance its lifespan:
Step 1: When you are on the home screen, press the knob to the main menu.
Step 2: Choose Brightness.
Step 3: Rotate the knob to set the desired brightness (The changes can be viewed on the LED screen instantly).
6.5 Image Quality
You can adjust the gamma, contrast, saturation, and hue values as needed. Choose Save RV Card Parameters to store these settings on the receiving cards when you finish your settings.
6.6 Factory Reset
This is to revert the controller’s settings back to the default factory settings.
6.7 Display Control
This function is used to control the display status on the LED screen:
Normal: The LED screen displays the content from the current input source.
Black Out: The LED screen turns black and does not show the input source, although the input source continues to play in the background.
Freeze: The LED screen displays the same frame continuously as if the image is frozen. The input source continues to play in the background.
Test Pattern: Test patterns are utilized to assess the display quality and the operational status of the pixels. There are eight test patterns available, which include solid colors and various line patterns.
6.8 Nova Star 660 Firmware Update
NovaLCT
In NovaLCT, perform the following steps to update the MCTRL660 firmware.
Step 1: Launch NovaLCT. In the menu bar, navigate to User > Advanced Synchronous System User Login. Input the password and log in.
Step 2: Enter the secret code “admin” to access the program loading page.
Step 3: Click Browse, choose the appropriate program package, and then select Update.
SmartLCT
In SmartLCT, perform the following steps to update the MCTRL660 firmware.
Step 1: Open SmartLCT and proceed to the V-Sender page.
Step 2: In the properties section on the right, click to go to the Firmware Upgrade page.
Step 3: Select the program path that needs to be updated.
Step 4: Click Update
7. FAQs about MCTRL660 NovaStar
What Is the Input and Output Spec of NovaStar MCTRL660?
It supports 1x DVI input, 1x HDMI input, 1x audio input, and 4x Ethernet outputs.
What Is the Load Capacity of MCTRL660 Pixel?
A single MCTRL660 device supports input resolutions up to 1920×1200@60Hz.
Is the MCTRL660 Compatible with My Existing LED Display System?
The Novastar MCTRL660 is designed to be highly compatible with a wide range of LED display systems. It supports most standard LED modules and can be integrated into various display setups.